Mag Hytec Rear Differential Cover 86-16 Ford F250 F350 Truck 12-10.25 & 10.5
This is a brand new Mag-Hytec Differential Cover with full factory warranty. We are an Authorized Dealer of Mag-Hytec and carry the full line of products.
Your Price: $251.75
Please contact our sales department for any additional information on all of our products at 623.580.8887
Fits the following applications:
'86-'98 Ford F-250/F-350 Pickup
'99-'16 Ford Super Duty F-250/F-350 (Single Rear Trucks Only)
Overall height 3 7/8"
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 6 Quarts
Part #: 12-10.25 & 10.5
Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load.Avoid costly reapirs - Extend the life of your Vehicle - Expand oil Capacity - Runs Cooler, Lasts Longer
Average of double the fluid capacityEase of ServiceThe dipstick is knurled for quick removal, the flat is marked low/high to check lube level and a magnet, which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to use for filling.The magnet-filled drain plug is the same MS port as the dipstick. Both the dipstick and drain are O-ring sealed.The sending unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug.The calibration plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level.The O-ring is snapped into the inverted "V" groove for a positive seal without gasket or silicone.Plugs, cap screws and washers are stainless steel in most applications.Mag-Hytec manufactures the best covers and pans available today.